The Ferrara hard X-ray facility for testing/calibrating hard X-ray focusing telescopes

We will report on the current configuration of the X-ray facility of the University of Ferrara recently used to perform reflectivity tests of mosaic crystals and to calibrate the experiment JEM–X aboard Integral. The facility is now located in the technological campus of the University of Ferrara in a new building (named LARIX laboratory= ̳LARge ̳Italian ̳X-ray facility) that includes a tunnel 100 m long with, on the sides, two large experimental rooms. The facility is being improved for determining the optical axis of mosaic crystals in Laue configuration, for calibrating Laue lenses and hard X-ray mirror prototypes.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

The HI halo of spiral galaxies

A deep H I survey with the VLA of the spiral galaxy NGC 2403 has revealed the existence of a thick, low density layer of neutral gas surrounding the thin ‘cold’ disk. This layer has a mean rotation velocity 25–50 km s^-1 lower than that of the disk and a 10–20 km s^-1inflow towards the centre of the galaxy. In the central parts there are velocity differences from rotation of up to 150 km s^-1.Chandra observations of NGC 2403 show a diffuse, hot X-ray emitting gas component with a temperature of a few 10⁶ K. These results point at galactic fountain type of flows between disk and halo. ‘Halo’ gas with similar characteristics has also been observed in other spiral galaxies(e.g. NGC 6946, NGC 891). Such gas is probably similar to the IVCs and to some of the HVCs of the Milky Way.     

High resolution simulations of January and July climate over the western Alpine region with a nested Regional Modeling system

Summary High resolution January and July present day climatologies over the central-western Alpine region are simulated with a Regional Climate Model (RegCM) nested within a General Circulation Model (GCM). The RegCM was developed at the National Center for Atmospheric Research (NCAR) and is run at 20 km grid point spacing. The model is driven by output from a present day climate simulation performed with the GCM ECHAM3 of the Max Planck Institute for Meteorology (MPI) at T106 resolution (~ 120 km). Five January and July simulations are conducted with the nested RegCM and the results for surface air temperature and precipitation are compared with a gridded observed dataset and a dataset from 99 observing stations throughout the Swiss territory. The driving ECHAM3 simulation reproduces well the position of the northeastern Atlantic jet, but underestimates the jet intensity over the Mediterranean. Precipitation over the Alpine region in the ECHAM3 simulation is close to observed in January but lower than observed in July. Compared to the driving GCM, the nested RegCM produces more precipitation in both seasons, mostly as a result of the stronger model orographic forcing. Average RegCM temperature over the Swiss region is 2–3 degrees higher than observed, while average precipitation is within 30% of observed values. The spatial distribution of precipitation is in general agreement with available gridded observations and the model reproduces the observed elevation dependency of precipitation in the summer. In the winter the simulated elevation of maximum precipitation amounts is lower than observed. Precipitation frequencies are overestimated, while precipitation intensities show a reasonable agreement with observations, especially in the winter. Sensitivity experiments with different cumulus parameterizations, soil moisture initialization and model topography are discussed. Overall, the model performance at the high resolution used here did not deteriorate compared to previous lower resolution experiments.The National Center for Atmospheric Research is sponsored by the National Science Foundation.With 11 Figures     

Modeling of the Guagua Pichincha volcano (Ecuador) lahars

Lahars, here defined as debris flows of volcanic origin, are rapid mass movements that pose a serious threat to cities located in the vicinity of many volcanoes. Quito, capital city of Ecuador and placed at the foot of the Pichincha volcano complex, is exposed to serious inundation hazard as part of the city is built on numerous deposits of large lahars that have occurred in the last 10,000 years.The objective of this paper is to model the potential lahars of the Pichincha volcano to predict inundation areas within the city of Quito. For this purpose two models that apply different approaches were utilized and their results were compared.The programs used were LAHARZ, a semi-empirical model conceived by the United States Geological Survey (USGS), and FLO-2D, a hydraulic model distributed by FLO Software Inc. LAHARZ is designed as a rapid, objective and reproducible automated method for mapping areas of potential lahar inundation (Proc. First Int. Conf. on Debris Flow Hazards Mitigation, San Francisco, USA, ASCE, 1998, p. 176). FLO-2D is a two-dimensional flood routing model for simulating overland flow on complex surfaces such as floodplains, alluvial fans or urbanized areas (FLO-2D Users manual, version 99.2). Both models run within geographical information systems (GIS).Fieldwork was focused on collecting all available information involved in lahar modeling. A total of 49 channel cross-sections were measured along the two main streams and stratigraphic investigations were carried out on the fans to estimate the volume of previous events. A global positioning system was utilized to determine the coordinates of each cross-section. Further data collection concerned topography, rainfall characteristics and ashfall thicknesses. All fieldwork was carried out in cooperation with the Instituto Geofisico of the Escuela Politecnica Nacional.Modeling in a GIS environment greatly aided the exportation of results for the creation of thematic maps and facilitated model comparison. Evaluation of the models was performed by comparing simulation results against each other and against the geometry of existing lahar deposits.     

土地利用变化对我国区域气候影响的数值试验

使用RegCM2区域气候模式单向嵌套澳大利亚CSIRO R21L9全球海-气耦合模式,通过将中国区域植被覆盖由理想状况改变为实际状况的数值试验对比分析,探讨了当代中国土地利用变化对中国区域气候的影响,并对结果进行了统计显著性检验。研究表明,土地利用的变化,会导致我国西北等地区年平均降水减少,导致年平均气温在内陆部分地区升高和在沿海个别地区降低,引起许多地方夏季日平均最高气温升高,而冬季日平均最低气温则在我国东部部分地区降低的同时在西北地区升高,土壤湿度的变化表现为大范围的降低。研究同时表明,相同的土地变化在不同的地理环境下引起的气候要素变化有一定的不一致性。     

Water level observations from unmanned aerial vehicles for improving estimates of surface water–groundwater interaction

Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.     

Global high resolution versus Limited Area Model climate change projections over Europe: quantifying confidence level from PRUDENCE results

Four high resolution atmospheric general circulation models (GCMs) have been integrated with the standard forcings of the PRUDENCE experiment: IPCC-SRES A2 radiative forcing and Hadley Centre sea surface temperature and sea-ice extent. The response over Europe, calculated as the difference between the 2071–2100 and the 1961–1990 means is compared with the same diagnostic obtained with nine Regional Climate Models (RCM) all driven by the Hadley Centre atmospheric GCM. The seasonal mean response for 2m temperature and precipitation is investigated. For temperature, GCMs and RCMs behave similarly, except that GCMs exhibit a larger spread. However, during summer, the spread of the RCMs—in particular in terms of precipitation—is larger than that of the GCMs. This indicates that the European summer climate is strongly controlled by parameterized physics and/or high-resolution processes. The temperature response is larger than the systematic error. The situation is different for precipitation. The model bias is twice as large as the climate response. The confidence in PRUDENCE results comes from the fact that the models have a similar response to the IPCC-SRES A2 forcing, whereas their systematic errors are more spread. In addition, GCM precipitation response is slightly but significantly different from that of the RCMs.     

温室效应对青藏高原及青藏铁路沿线气候影响的数值模拟

在一个全球模式中嵌套了RegCM2区域气候模式,进行了CO2加倍对中国区域气候影响的数值试验,对青藏高原及青藏铁路沿线地区进行了重点分析。结果表明,在CO2加倍的情况下,这里的气温将明显升高,升高值一般在2．6～2．8℃以上,高于全国平均值。同时降水在青藏高原大部分地区也将明显增加;其中青藏铁路沿线的增加率一般在25％以上,远高于全国平均值水平。温室效应同时会使得青藏铁路沿线的日平均最高气温升高。